unconfigure ripng

unconfigure ripng {vlan vlan-name | tunnel tunnel-name | vlan all | tunnel all}


Resets RIPng parameters to the default value.

Syntax Description

vlan-name Specifies an IPv6 configured This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, 5520 series switches..
tunnel-name Specifies an IPv6 tunnel.
all Specifies either all IPv6 configured VLANs or all IPv6 tunnels.



Usage Guidelines

Issuing the command unconfigure ripng resets all the interfaces and the global configuration to the defaults, and disables RIPng, as that is the default.


The following command resets the RIPng configuration to the default for the VLAN finance:

unconfigure rip finance


This command was first available in ExtremeXOS 11.2.

Platform Availability

This command is available on platforms with an Edge, Advanced Edge, or Core license. For licensing information, see the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.