Resets all MVRP settings for the given This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, 5520 series switches. id. The STP domain, the registrar state machine settings, applicant state machine settings for the given VLAN are reset to default values.
| mvrp | Multiple VLAN Registration Protocol. |
| vlan_tag | The 802.1Q VLAN ID. |
N/A.
Use this command to reset all MVRP settings for the given VLAN id. The STP domain, the registrar state machine settings, and the applicant state machine settings for the given VLAN are reset to default values. All dynamically added ports of the VLAN are removed. If the VLAN was created dynamically, it is removed. If VLAN is not specified, MVRP settings for all VLANs are reset and the dynamic VLAN creation feature is reset to “enabled”.
The following example shows unconfiguring an MVRP:
unconfigure mvrp tag 100
This command was first available in ExtremeXOS 15.3.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.