show iproute origin

show iproute origin [auto-peering | bgp | blackhole | bootp | direct | ebgp | embgp | ibgp | icmp | imbgp | isis | isis-level-1 | isis-level-1-external | isis-level-2 | isis-level-2-external | mbgp | mpls | evpn {signaling-protocol [ldp | rsvp-te | static]} | ospf | ospf-extern1 | ospf-extern2 | ospf-inter | ospf-intra | rip | static ] {unicast} {vr vrname}

Description

Displays the contents of the IP routing table for routes with the specified origin.

Syntax Description

auto-peering Specifies BGP auto-peering routes.
bgp Specifies BGP routes.
blackhole Specifies blackhole routes.
bootp Specifies BOOTP routes.
direct Specifies direct routes.
ebgp Specifies E-BGP routes.
embgp Specifies EMBGP routes.
ibgp Specifies I-BGP routes.
icmp Specifies ICMP routes.
imbgp Specifies IMBGP routes.
isis Specifies IS-IS routes.
isis-level-1 Specifies IS-IS Level 1 routing.
isis-level-1-external Specifies IS-IS Level 1 External routing.
isis-level-2 Specifies IS-IS Level 2 routing.
isis-level-2-external Specifies IS-IS Level 2 External routing.
mbgp Specifies MBGP routes.
mpls Specifies MPLS routes. This option is available only on platforms that support the MPLS feature pack, which is described in the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.
evpn Specifies EVPN routes.
signaling-protocol [ldp | rsvp-te | static] Specifies an MPLS signaling protocol. This option is available only on platforms that support the MPLS feature pack, which is described in the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.
ospf Specifies OSPF routes.
ospf-extern1 Specifies OSPF External 1 routing.
ospf-extern2 Specifies OSPF External 2 routing.
ospf-inter Specifies OSPFInter routing.
ospf-intra Specifies OSPFIntra routing.
rip Specifies RIP routes.
static Specifies static routes.
unicast Displays unicast routes with the specified origin.
vrname Specifies a VR or VRF.

Default

N/A.

Usage Guidelines

None.

Example

The following example displays all the BGP routes:

# show iproute origin bgp

History

This command was first available in ExtremeXOS 10.1.

The ipv4 keyword was added in ExtremeXOS 11.2.

The embgp, mbgp, and mpls options were added and the ipv4 and multicast options removed in ExtremeXOS 12.2.2.

The evpn option was added in ExtremeXOS 30.7.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.