The Avaya phone uses this proprietary LLDP TLV to learn the IP address(es) of the call server(s) to use.
configure lldp ports [all | port_list] [advertise | no-advertise] vendor-specific avaya-extreme call-server ip_address_ {ip_address_2 {ip_address_3 {ip_address_4 {ip_address_5 {ip_address_6 {ip_address_7 {ip_address_8}}}}}}}Configures the LLDP port to advertise or not advertise up to 8 call server IP addresses to its neighbors.
| all | Specifies all ports on the switch. |
| port_list | Specifies one or more ports or slots and ports. |
| advertise | Specifies to send the information to neighbors. |
| no-advertise | Specifies not to send the information to neighbors. |
| ip_address_1....8 | Specifies IP address of up to
8 call servers. Note:
NOTE: This parameter does not apply when you configure the no-advertise parameter. |
No advertise.
The Avaya phone uses this proprietary LLDP TLV for addressing information. You can configure the IP address for up to 8 call servers in a single TLV.
The following command configures ports 1-5 to advertise two call server IP addresses to neighbors:
configure lldp ports 1-5 advertise vendor-specific avaya-extreme call-server 10.10.10.10 10.11.10.10
This command was first available in ExtremeXOS 11.5.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.