show ip nat vlan

show ip nat vlan {vlan_name}

Description

Shows Network Address Translation (NAT) VLAN information.

Syntax Description


ip	Shows Internet Protocol (IP) information.
nat	Shows NAT information.
vlan	Specifies VLAN NAT information.
`vlan_name`	Specifies which VLAN to show NAT information for.

Default

N/A.

Usage Guidelines

To view information for a specific VLAN, specify the VLAN name when running this command.

Example

The following example shows VLAN NAT information:

# show ip nat vlan
VLAN Name                         Direction
================================  =========
engineering                       Both   
in                                Ingress   
out                               Egress  
===========================================
Total Number of NAT VLANs   : 3
Maximum number of NAT VLANs : 4

History

This command was first available in ExtremeXOS 31.2.

Platform Availability

This command is available on the switches that support the IP NAT feature. For information about which switches support this and other features, see the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.