show vm guest interfaces

show vm vm_name guest interfaces

Description

Shows the interfaces of a running guest virtual machine (VM).

Syntax Description

vm Designates a virtual machine.
vm_name Specifies the VM name to show interfaces for.
guest Specifies guest OS viewpoint.
interfaces Specifies interfaces and addresses.

Default

N/A.

Usage Guidelines

The Integrated Application Hosting (IAH) feature requires the Solid State Storage Device SSD-120.

For this command to work, qemu guest agent must be running on the guest VM.

Example

The following example shows the interfaces for VM "vm1":

# show vm vm1 guest interfaces
Name       MAC address          Protocol     Address
-------------------------------------------------------------------------------
lo         00:00:00:00:00:00    ipv4         127.0.0.1/8
-          -                    ipv6         ::1/128
ens8       52:54:00:d4:88:59    ipv4         10.68.13.7/24
-          -                    ipv6         fe80::5054:ff:fed4:8859/64
ens6       00:11:88:fe:ab:75    ipv4         192.168.1.5/24
-          -                    ipv6         fe80::211:88ff:fefe:ab75/64
ens7       00:11:88:fe:ab:76    ipv4         192.168.0.5/24
-          -                    ipv6         fe80::211:88ff:fefe:ab76/64 

History

This command was first available in ExtremeXOS 30.3.

Platform Availability

This command is available on all platforms that support the Integrated Application Hosting (IAH) feature and have a Core or Premier license installed. For a list of platforms that support the IAH feature and for information about licenses, see the ExtremeXOS and Switch Engine 31.7 Feature License Requirements .