configure port reflective-relay

configure port port reflective-relay [on | off]


Enables the direct attach feature on the specified port.

Syntax Description


Specifies a single port on which to enable the direct attach feature.



Usage Guidelines

You should only enable the direct attach feature on ports that directly connect to a VM server running VEPA software.

This feature requires installation of the Direct Attach feature pack. For more information, see the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document..


The following command enables the direct attach feature on port 2:1:

# configure port 2:1 reflective-relay on


This command was first available in ExtremeXOS 12.5.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.