disable mpls static lsp

disable mpls static lsp {lsp_name | all }


Administratively disables one or all static LSPs.

Syntax Description

lsp_name Identifies an LSP to be disabled.
all Specifies that all static LSPs on this LSR are to be disabled.



Usage Guidelines

On executing this command, the software de-activates the specified LSPs by setting the administrative state of each LSP to down.


The following command disables a static LSP:

disable mpls static lsp lsp598


This command was first available in ExtremeXOS 12.1.

Platform Availability

This command is available only on the platforms that support MPLS as described in the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.