reset inline-power ports

reset inline-power ports port_list


Power cycles the specified ports.

Syntax Description

port_list Specifies one or more ports or slots and ports for which power is to be reset.



Usage Guidelines

This command power cycles the specified ports. Ports are immediately disabled and then re-enabled, allowing remote PDs to be power-cycled.

This command affects only inline power; it does not affect network connectivity for the port(s).


The following command resets power for port 4 on a switch:

reset inline-power ports 4


This command was first available in ExtremeXOS 11.1.

Platform Availability

This command is available on the This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X620, 5320, 5420, 5520 series switches. devices listed in Extreme Networks PoE Devices.