configure bootprelay delete

configure bootprelay {ipv4 | ipv6} delete [ip_address | all] {vr vrid}


Removes one or all IP destination addresses for forwarding BOOTP packets.

Syntax Description

ipv4 DHCPv4 BOOTP Relay service (default).
ipv6 DHCPv6 BOOTP relay service.
ip_address Specifies an IP address.
all Specifies all IP address entries.
vrid Specifies a VR or VRF name.


If you do not specify a VR, the current VR context is used.

If you do not specify DHCPv4 or v6 BOOTP Relay service, DHCPv4 is used.

Usage Guidelines



The following command removes the destination address:

configure bootprelay delete


This command was first available in ExtremeXOS 10.1.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.