| vlan_name |
Specifies to apply settings to specific This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, 5520 series switches. name. |
| all |
Specifies all VLANs. |
| none |
Specifies to drop all received RIP packets. |
| v1only |
Specifies to accept only RIP version 1 format packets. |
| v2only |
Specifies to accept only RIP version 2 format packets. |
| any |
Specifies to accept RIP version 1 and RIP version 2 packets. |
N/A.
None.
The following command configures the receive mode for the VLAN finance to accept only RIP version 1 format packets:
# configure rip finance rxmode v1only
This command was first available in ExtremeXOS 10.1.
This command is available on all platforms with an Edge or Base license or higher as described in the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.