disable bgp export [static | direct] l2vpn-evpn

disable bgp export [static | direct] {address-family address_family} l2vpn-evpn {vr vr_name}


Disables export of direct, static, and BGP routes from a VRF into BGP, running on the specified VR, as EVPN routes to be advertised by BGP as Type 5 routes.

Syntax Description

bgp Specifies showing the BGP configuration.
export Specifies redistributing information from another routing protocol.
static Specifies static routes.
direct Specifies direct routes.
address-family Specifies the address family.
address_family Sets the address family type.
l2vpn-evpn Specifies the L2VPN EVPN address family.
vr Specifies the source VR.
vr_name Designates the source VR name. Both VPN-VRFs and non-VPN-VRFs are supported.



Usage Guidelines



The following example disables exports of static routes on VR "vr-a" as EVPN routes to be advertised by BGP as Type 5 routes:

# disable bgp export static l2vpn-evpn vr vr-a


This command was first available in ExtremeXOS 30.6.

Platform Availability

This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the BGP feature, see the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.