Enables CDP on a port.
| seconds | Specifies the transmit frequency in seconds. The range is 5,254 seconds. The default value is 60 seconds. |
60 seconds.
The following command configures the CDP frequency as two minutes:
configure cdp frequency 120
This command was first available in ExtremeXOS 15.4.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.