Enables the configured authentication failure This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, 5520 series switches. on the specified ports.
| all | Specifies all ports included in the authentication failure VLAN. |
| ports | Specifies one or more ports or slots and ports on which the authentication failure VLAN is enabled. |
All ports.
Use this command to enable the configured authentication failure VLAN on either the specified ports, or all ports.
This command was first available in ExtremeXOS 12.1.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.