Calculates the actual time-to-live (TTL) value used in the LLDPDU messages.
The formula is transmit-interval * transmit-hold; by default the TTL value is (30*4) 120 seconds.
| hold | Used to calculate the TTL value; the range is 2 to 10. |
4.
N/A.
The following command configures the transmit-hold value (which is used to calculate the TTL of the LLDP packets) to 5:
configure lldp transmit-hold 5
This command was first available in ExtremeXOS 11.2.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.