configure isis area timer lsp-refresh-interval

configure isis area area_name timer lsp-refresh-interval seconds

Description

This command configures the refresh rate for locally originated LSPs.

Syntax Description

area_name Specifies the router process for which you are setting the LSP refresh timer.
seconds Specifies the LSP refresh interval. The range is 1 to 65535 seconds.

Default

900 seconds.

Usage Guidelines

This value should be configured to be less than the maximum LSP lifetime value, which is set with the configure isis area area_name timer max-lsp-lifetimeseconds command. Locally originated LSPs are purged and retransmitted at the specified interval regardless of link state.

Example

The following command sets the LSP refresh timer for areax to 1200 seconds:

configure isis area areax timer lsp-refresh-interval 1200

History

This command was first available in ExtremeXOS 12.1.

Platform Availability

This command is available on platforms with a Core or Premier license as described in the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.