configure automation edge connect/disconnect

configure automation edge [connect | disconnect] database database_name

Description

Connects or disconnects an Automation Edge remote VXLAN network identifier (VNI)-device database.

Syntax Description

automation Designates configuring Automation Edge VXLAN VNI-device database information.
edge Designates configuring Automation Edge VXLAN VNI-device database information.
connect Designates connecting to the specified database.
disconnect Designates disconnecting from the specified database.
database Designates connecting or disconnecting a database.
database_name Sets the database name that you are connecting or disconnecting.

Default

N/A.

Usage Guidelines

To connect to another new database, an existing database must be disconnected first. To view the connected database, use the command show database database_name

Example

The following example connects the database "database1":

# configure automation edge connect database database1

The following example disconnects the database "database1":

# configure automation edge disconnect database database1

History

This command was first available in ExtremeXOS 31.1 as a demonstration feature.

This command is fully supported in ExtremeXOS 31.2.

Platform Availability

This command is available on ExtremeSwitching X465, X590, X670-G2, X690, X695, X870, 5320, 5420, 5520 series switches.