show fabric attach zero-touch-client

Description

Displays the configured ZTC mappings for Fabric Attach Zero Touch Clients.

Syntax Description


zero-touch-client	Displays Zero Touch Clients.

Default

If no mapping is present, no information will be displayed for the client type.

Usage Guidelines

This command is only used when mappings are present.

Example

The following example displays configured Fabric Attach Zero Touch Clients:

# show fabric attach zero-touch-client 
Client Name         VLAN Name                        NSI/I-SID Priority Status
------------------- -------------------------------- --------- -------- --------
wap-type1           VLAN_123                             11111    dot1p Enabled
camera              VLAN_200                              2000        5 Disabled
ona-spb-over-ip     VLAN_4001                            40001        7 Enabled

History

This command was first available in ExtremeXOS 31.3.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.