create time profile

create time-profile time_profile_name start start_hour : start_minute {start_month {/start_day/start_year}}stop [stop_hour:stop_minute {stop_month {/stop_day { / stop_year }}} | in stop_count stop_units ] { recur [ daily every daily_interval days |weekly every weekly_interval weeks {on [weekdays | weekends | weekly_day]} |monthly every monthly_interval months {on [monthly_day day | monthly_week week ] } |yearly every yearly_interval years{ on yearly_week week of yearly_month }] {begins begin_month/begin_day {/begin_year}ends [ end_month/end_day/end_year} | after recur_count recurrences ]}}

Description

Configures a time profile of an appointment starting at a specific time on a specific calendar date.

Syntax Description


`time_profile_name`	Specifies the name of the time profile.
start	Specifies the appointment starting specification .
`start_hour`	Specifies the start hour. The range is 0-23.
`start_minute`	Specifies the start minutes. The range is 0-59.
`start_month`	Specifies the start month. The range is 1-12.
`start_day`	Specifies the start day. The range is 1-31.
`start_year`	Specifies the start year, YYYY.
stop	Specifies the appointment stopping specification.
`stop_hour`	Specifies the stop hour. The range is 0-23.
`stop_minute`	Specifies the stop minutes. The range is 0-59.
`stop_month`	Specifies the stop month. The range is 1-12.
`stop_day`	Specifies the stop day. The range is 1-31.
`stop_year`	Specifies the stop year, YYYY.
in	Specifies the stop in time.
`stop_count`	Specifies the stop count.
`stop_units`	Specifies the stop units (for example, minutes , hours, days, weeks).

Default

N/A.

Usage Guidelines

Use this command to create a time profile of an appointment starting at a specific time on a specific calendar date.

Example

The following example configures a time profile named "testprofile" to start at 11:30 a.m. on February 24, 2012:

configure time profile testprofile start 11 :  30 { 2 { / 24 { /  2012

History

This command was first available in ExtremeXOS 15.3.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.