This command modifies the flooding mode of an existing virtual network.
| vn_name | Alphanumeric string identifying the Virtual Network to be configured. |
| standard | Head-end replication to remote endpoints with standard L2 flooding to tenant ports. |
| multicast | Multicast flooding to remote endpoints with standard L2 flooding to tenant ports. |
| group | Configure multicast group for flooding of unknown-destination frames (automatically assigned if unspecified). |
| grpipaddress | IPv4 multicast group address to be used for flooding. |
| none | Unconfigure multicast group. Flooding changes to auto-assigned multicast group. |
Standard.
For auto-assigning multicast groups, you must configure the following command: configure virtual-network multicast group.
This command is not allowed on dynamic virtual networks.
To configure multicast flooding mode (group is auto-assigned):
configure virtual-network my_virtual_network flooding multicast
To configure multicast flooding mode specifying a multicast group:
configure virtual-network my_virtual_network flooding multicast group 232.1.1.1
To unconfigure multicast group (flooding changes to auto-assigned group):
configure virtual-network my_virtual_network flooding multicast none
To configure standard flooding mode:
configure virtual-network my_virtual_network flooding standard
This command was first available in ExtremeXOS 31.2.
This command is supported on the ExtremeSwitching X670-G2, X465, X590, X690, , X695, X870, 5320, 5420, 5520 standalone, and stacks with X465, X590, X670-G2, X690, X695, X870, 5320, 5420, 5520 slots only.