Configures whether counters need to be installed for Virtual Machine MAC which receives this VPP mapping.
| ingress-only | Only counts packets ingressing the switch whose source MAC address matches VM MAC. |
| egress-only | Only counts packets egressing the switch whose source MAC address matches VM MAC. |
| both | Counts packets ingressing and egressing the switch whose source MAC address matches VM MAC. |
| none | No packets will be counted. |
N/A.
Use this command to configure whether counters need to be installed for Virtual Lachine MAC which receives this VPP mapping.
Example output not yet available and will be provided in a future release.
This command was first available in ExtremeXOS 15.3.
This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, 5520 series switches.