show router-discovery

show router-discovery {ipv6} {vlan vlan_name}

Description

Displays the router discovery settings.

Syntax Description


`vlan_name`	Specifies an IPv6 configured This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, 5520 series switches..

Default

N/A.

Usage Guidelines

If no VLAN is specified, the settings are displayed for all IPv6 configured VLANs.

Example

The following example displays router discovery settings for the VLAN "top_floor":

# show router-discovery vlan top_floor
Router Advertisements disabled on v1
Router Advertisements are sent only with VRRP‘s Virtual LLA: On
Minimum/Maximum Interval:  200 / 600
Managed / Other Info Flags:  Off / Off
Link MTU:  0
Reachable Time:  0
Retrans Timer:  0
Current Hop Limit:  64
Default Lifetime:  1800
Number of Prefixes:  1,  Prefix List:
Valid           Preferred
Prefix  Lifetime     Auto  Lifetime OnLink
2001:db8::1/64
2592000       On    604800     On

History

This command was first available in ExtremeXOS 11.2.

Router advertisements sent only with VRRP‘s virtual LLA information added in ExtremeXOS 31.7.

Platform Availability

This command is available on all platforms that support the Advanced Edge License as shown in the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.