enable snmp traps configuration

enable snmp traps configuration [save | change]


Enables sending SNMP trap when saving or changing the switch configuration.

Syntax Description

configuration Sends SNMP trap for switch configuration.
save Generates SNMP trap when switch configuration is saved (default is disabled).
change Generates SNMP trap when switch configuration is changed (default is disabled).


The default is that SNMP traps are disabled for switch configuration changes/saves.


The following example enables SNMP traps for switch configuration changes:

enable snmp traps configuration change


This command was first available in ExtremeXOS 22.1.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches..