show network-clock clock-source
show network-clock clock-source
Description
Displays the configured network clock source information.
Usage Guidelines
The
ExtremeSwitching switches have clock sources in addition to SyncE. The clock
that drives all of the ports on a switch may be selected from:
- SyncE (Synchronous
Ethernet).
- PTP – Precision Time
Protocol, an optional 1588v2 module.
- TDM – an optional module
which has multiple T1/E1 interfaces for TDM/Ethernet interworking.
- BITS – Building Integrated
Timing Supply. A connector capable of receiving a timing signal provided by
other building equipment.
Example
The following is an example for a switch:
# show network-clock clock-source
Input Clock Source : Sync-E
Input Quality Level : QL-SEC (11)
Input Region : E1
Input Clock Status : LOCAL CLOCK
Output Bits BNC 1 Clock Source : 8KHz
Output Bits BNC 2 Clock Source : E1
History
This command was first available in ExtremeXOS 15.1.
Platform Availability
This command is available on ExtremeSwitching X460-G2 series switches.
