show policy access-list action-set

show policy access-list action-set {set_id}

Description

Shows the pre-defined action set for use in RADIUS Change of Authentication (CoA).

Syntax Description


access-list	Specifies access-list features.
action-set	Defines viewing the set of actions applied to multiple sets of match conditions.
`set_id`	Specifies viewing a particular action set identified with the global action-set ID (range 1–63).

Default

N/A.

Usage Guidelines

If you do not specify a set_id, all actions sets appear.

You can made configuration changes using the create policy access-list action-set set-id [{drop | forward} {cos cos} {mirror-destination control_index} {syslog}] command.

Example

The following example shows information for action set "1":

# show policy access-list action-set 1
PID |ACL/Rule/Match   |Match Data           |Msk|PortStr  |ST|S|VLAN|CoS |Mir|
    | action set  1   |                     |   |         |NV|S|    |   3|   |

History

This command was first available in ExtremeXOS 30.5.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.