configure snmpv3 delete target-params

configure snmpv3 delete target-params [{[[hex hex_param_name] | param_name]} | all]

Description

Deletes SNMPv3 target parameters.

Syntax Description


`hex_param_name`	Specifies the parameter name associated with the target. The value is to be supplied as a colon separated string of hex octets.
`param_name`	Specifies the parameter name associated with the target in ASCII format.

Default

N/A.

Usage Guidelines

Use this command to delete an entry in the SNMPv3 snmpTargetParamsTable. This table specifies the message processing model, security level, security model, and the storage parameters for messages to any target addresses associated with a particular parameter name.

Example

The following command deletes a target parameters entry named P1:

configure snmpv3 delete target-params P1

History

This command was first available in ExtremeXOS 10.1.

The hex_param_name parameter was added in ExtremeXOS 11.0.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.