configure vrrp fabric-routing

configure vrrp vlan [vlan_name | vlan_list] vrid [vridval | vrid_list] {group group_name }fabric-routing [on | off]


This command configures fabric routing.

Syntax Description

group Specifies VRRP VRs information that form the group.
group_name Name of the specific VRRP group.
fabric-routing Configures fabric routing on all members of the group.
on Enables fabric routing capability.
off Disables fabric routing capability.
port_list Port list separated by a comma or –.

Specifies the name of a VRRP This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, 5520 series switches..

vlan_list VLAN list (1–4,094).

Specifies the VRID for the VRRP instance. To display the configured VRRP router instances, enter the show vrrp command.

vrid_list List of virtual router IDs (1–255).



Usage Guidelines

This configuration can be present on all VRRP routers, regardless of the VRRP state of the router. Fabric routing is enabled only when the VRRP router is in backup state.

You need to configure fabric routing on all members of group when a member‘s VRID is reused in another group.


The following command turns on fabric routing capability on all VR members of the group "ExtremeNet":

configure vrrp group ExtremeNet fabric-routing on 


This command was first available in ExtremeXOS 22.2.

VLAN and VR list options added in ExtremeXOS 22.3.

Platform Availability

This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the VRRP feature, see the ExtremeXOS and Switch Engine 31.7 Feature License Requirements document.