Enables processing of the record route IP option in the IPv4 packet header.
This command has no arguments or variables.
Enabled.
IP option record-route (IP option 7) means that each router along the path should add its IP address into the options data.
Enabling means that the switch adds itself into the IP options header when the record route IP option is enabled in a packet that is transiting the switch.
The following example enables processing of the record route IP option:
enable ip-option record-route
This command was first available in ExtremeXOS 10.1.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.