AP310i/e Specifications

AP310i/e is a dual-radio indoor model 802.11ax access point. The “i” in AP310i/e indicates that the access point comes with internal antennas, and the “e” indicates that it comes with external antenna connectors. The access point features one built-in dual-band radio and one band-locked radio, four WiFi internal or external antennas, and one Bluetooth Low Energy (BLE) antenna.

Note

The AP310i/e requires a minimum base firmware of WiNG 7.3.1.

Two 802.11ax radios (one 2×2 2.4 GHz and 5 GHz radio, and one 2×2 5 GHz radio)
One 2.4 GHz IoT radio
Console Port: RJ45
Two Ethernet Ports:
- GE1 - 10/100/1000/2500/5000 Mbps auto-negotiation Ethernet port, RJ45, with Power over Ethernet (PoE) In
- GE2 - One multi-rate GE/2.5 GE Ethernet port
LED indicators: Six
All LED indicators will be powered on during reset.
One Reset button
One Kensington lock
One safety hanger provision
One USB 2.0 type A connector
Power: PoE 802.3at
Antennas:
- AP310i: Four WiFi internal antennas and one BLE internal antenna
- AP310e: Four RP-SMA external antenna ports and one BLE RP-SMA antenna