AP360i/e Specifications

AP360i/e is an outdoor model 802.11ax access point with dual band 2×2 system-on-a-chip (SoC) radios. The "i" in AP360i/e indicates that the access point comes with internal antennas and the “e” indicates that it comes with external antenna connectors. The access points feature a dual-band radio, one band-locked radio WiFi radio, one bluetooth radio, four WiFi internal or external antennas, and one Bluetooth Low Energy (BLE) antenna.

Note

The AP360e requires a minimum base firmware of WiNG 7.3.1.

Radios:
- Two 802.11ax radios (one 2×2 2.4GHz and 5GHz radio, and one 2×2 5GHz radio)
- One IoT radio (2.4GHz)
Console port: RJ45
Two Ethernet ports:
- 1×100/1000 Mbps auto-negotiation Ethernet port, RJ45
- 1×10/100/1000 Mbps auto-negotiation Ethernet port, RJ45
LEDs: Six. All LEDs will be on during reset
One rest button
Power: PoE 802.3af
Antennas:
- Four WiFi internal antennas on AP360i and four WiFi external antennas on AP360e
- One BLE internal antenna on AP360i and one BLE external antenna port on AP360e
Temperature: -40°C to +60°C (-40°F to +140°F) @ 6000 ft.
Enclosure: Plastic