guest-database-backup

Enables periodic backup of a captive portal guest registration user database. This option is enabled by default.

Supported on the following platforms:

Service Platforms — NX 75XX, NX 95XX, NX 96XX, VX 9000

Syntax

guest-database-backup enable {<TIME>}

Parameters

guest-database-backup enable {<TIME>}


guest-database-backup enable {<TIME>}	Enables periodic backup of a captive portal guest registration user database. This command also allows you to configure the time at which the system starts backing up the database. The default backup-start time is ‘00:00‘ (midnight every day). <TIME> – Optional. Resets the periodic database backup-start time to a user-defined value in the HH;MM format. When specified, the system starts periodic backup of the database, every day, at the specified time.

Examples

nx9500-6C8809(config-guest-management-test)#guest-database-backup enable 12:30

nx9500-6C8809(config-guest-management-test)#show context
guest-management test
 guest-database-backup enable 12:30
nx9500-6C8809(config-guest-management-test)#

Related Commands


no (guest-management-policy-config-commands)	Disables periodic backup of a captive portal‘s guest registration user database