assoc-response

Configures the deny-threshold and rssi-threshold values. These threshold values are considered when responding to a client‘s association/authentication request.

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

assoc-response [deny-threshold <1-12>|rssi-threshold <-100--40>]

Parameters

assoc-response [deny-threshold <1-12>|rssi-threshold <-100--40>]


assoc-response	Configures the association response thresholds
deny-threshold <1-12>	Configures the number of times association/authentication request, from a client, is ignored if the RSSI is less than the configured RSSI threshold. This option is disabled by default. <1-12> – Specify the deny-threshold from 1 - 12.
rssi-threshold <-100--40>	Configures an association response RSSI threshold value. If the RSSI is below the configured threshold value, the client‘s association/authentication request is ignored. This option is disabled by default. rssi-threshold <-100--40> – Specify a value from -100 - -40 dBm.

Examples

nx9500-6C8809(config-wlan-test)#assoc-response rssi-threshold -60

nx9500-6C8809(config-wlan-test)#assoc-response deny-threshold 4

nx9500-6C8809(config-wlan-test)#show context
wlan test
 ssid test
 bridging-mode local
 encryption-type none
 authentication-type none
 assoc-response rssi-threshold -60
 assoc-response deny-threshold 4
 registration user group-name guest expiry-time 2000 agreement-refresh 14400
nx9500-6C8809(config-wlan-test)#

Related Commands


no (wlan-config-mode)	Removes the configured deny-threshold and rssi-threshold values