wips-policy-commands

The following table summarizes WIPS policy configuration commands:

Table 1. WIPS-Policy Config Mode Commands
Command	Description
ap-detection	Defines the WIPS AP detection configuration
enable	Enables the WIPS policy
event	Configures events
history-throttle-duration	Configures the duration event duplicates are omitted from the event history
interference-event	Specifies events contributing to the Smart RF WiFi interference calculations
signature	Configures a WIPS policy signature and enters its configuration mode
use	Defines a WIPS policy settings
no (wips-policy-config-mode-command)	Negates a command or sets its default

Note

For more information on common commands (clrscr, commit, help, revert, service, show, write, and exit), see Common Commands.

Note

The input parameter <HOSTNAME>, wherever used in syntaxes across this chapter, cannot include an underscore (_) character. In other words, the name of a device cannot contain an underscore.