control-vlan

Configures the VLAN designated for traffic control in this RF Domain

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

control-vlan [<1-4094>|<VLAN-ALIAS-NAME>]

Parameters

control-vlan [<1-4094>|<VLAN-ALIAS-NAME>]


control-vlan [<1-4094>\|<VLAN-ALIAS-NAME>]	Specify the VLAN ID from 1 - 4094. Alternately, use a vlan-alias to identify the control VLAN. If using a vlan-alias, ensure that the alias is existing and configured.

Examples

nx9500-6C8809(config-rf-domain-default)#control-vlan 1

nx9500-6C8809(config-rf-domain-default)#show context
rf-domain default
 contact Bob+14082778691
 no country-code
 channel-list 2.4GHz 1,2,3,4,5,6,7,8,9,10
 control-vlan 1
nx9500-6C8809(config-rf-domain-default)#

Related Commands


no (rf-domain-config-mode)	Disables the VLAN designated for controlling RF Domain traffic