Configures WEP128 parameters. The parameters are: key, key-from-passkey,
and transmit-key.
key <1-4>
Use to configure the key number
<1-4> – Specify
the key number from 1 - 4.
ascii [0 <WORD>| 2 <WORD>|<WORD>]
Sets keys as ASCII characters (5 characters for WEP64, 13 for WEP128)
0 <WORD> –
Configures a clear text key
2 <WORD> –
Configures an encrypted key
<WORD> –
Configures keys as 13 ASCII characters converted to hex, or 26
hexadecimal characters
hex [0 <WORD>| 2 <WORD>|<WORD>]
Sets keys as hexadecimal characters (10 characters for WEP64, 26 for
WEP128)
0 <WORD> –
Configures a clear text key
2 <WORD> –
Configures an encrypted key
<WORD> –
Configures keys as 13 ASCII characters converted to hex, or 26
hexadecimal characters
wep128 keys-from-passkey <WORD>
keys-from-passkey <WORD>
Specifies a pass key. The pass key can be any alphanumeric string.
Controllers, service platforms, Access Points and their connected clients
use the algorithm to convert an ASCII string to the same hexadecimal number.
Clients without adapters need to use WEP keys manually configured as
hexadecimal numbers.
<WORD> – Specify
a pass key from 4 - 32 characters.
wep128 transmit-key <1-4>
transmit-key <1-4>
Configures the key index used for transmission from an AP to a wireless
client or service platform
