| file-sync | Displays the following file-synchronization (trustpoint and wireless-bridge certificate) related information: configuration, history, load-file-status, and status |
| configuration | Displays the following file-synchronization configuration details:- automatic file-syncing enabled or disabled. The default setting is disabled.
The X.509 certificate needs synchronization only if the access point‘s radio2 is configured to use EAP-TLS authentication. In which case PKCS#12 certificate needs to be pushed on AP adoption. To enable automatic file syncing, in the controller‘s device/profile configuration mode, execute the file-sync > auto command. For more information, see file-sync (profile config mode).
- Number of access points to which the certificate can be simultaneously uploaded. The default is 10.
To modify the number of simultaneous uploads, in the controller‘s device/profile configuration mode, execute the file-sync > count <1-20> command. For more information, see file-sync (profile config mode).
- Scheduled certificate upload, if any, details, such time and date of upload.
To schedule certificate upload, use the file-sync > wireless-certificate command. For more information, see file-sync (profile config mode).
|
| history | Displays file synchronization history. Use this option to view statistical data relating to wireless-bridge certificate synchronization between staging controller and its access points. When executed, a list of all certificate transfers made to the APs is displayed, with the latest transfer listed at the top. |
| load-file-status | Displays the status of the file upload to the controller. Use this command to view the status of a in-progress certificate upload. For more information on initiating a PKCS#12 certificate upload, see file-sync (profile config mode). |
| status | Displays status of the file synchronization between the controller and its adopted access point. |
| on <DEVICE-OR-DOMAIN- NAME> | Optional. Displays file synchronization settings and status on a specified device or RF Domain - <DEVICE-OR-DOMAIN- NAME> – Specify the name of the controller, service platform, or RF Domain.
|
