location
Device Config Commands
Sets the location where a managed device (controller, service platform, or access point) is deployed. This is the location of the device with respect to the RF Domain it belongs.
Supported on the following devices:
Access
Points: AP3000 /X, AP5010 , AP310i/e , AP410i/e , AP505i , AP510i , AP510e , AP560i , AP7602 , AP7612 , AP7622 , AP7632 , AP7662 , AP8163 , AP8533 . Service Platforms: NX5500, NX7500, NX9500, NX9600 Virtual Platforms : CX9000, VX9000 Parameters location <WORD>
<WORD> Specify the managed device‘s location as part of its RF Domain configuration
Example nx9500-6C8809(config-device-94-9B-2C-13-3E-1C)#location SanJose
nx9500-6C8809(config-device-94-9B-2C-13-3E-1C)#show context
ap505 94-9B-2C-13-3E-1C
use profile default-ap505
use rf-domain default
hostname TechPubAP505
area RMZEcospace
floor 5thfloor
layout-coordinates 1.0 2.0
location SanJose
contact Bob+1-631-738-5200
country-code us
channel-list 2.4GHz 1,2
nx9500-6C8809(config-device-94-9B-2C-13-3E-1C)#
Related Commands no Removes a managed device‘s location
