zone

Configures the zone for devices using this profile. The zone can also be configured on the device‘s self context.

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

zone <NAME>

Parameters

zone <NAME>


zone <NAME>	Configures the device‘s zone/area <NAME> – Specify the zone/areaname.

Example

nx9500-6C8809(config-profile-testNX9000)#szone Ecospace

nx9500-6C8809(config-profile-testNX9000)#show context include-factory | include
zone
 zone Ecospace
nx9500-6C8809(config-profile-testNX9000)#

Related Commands


no	Removes the zone configured on this profile or device