controller-assisted-mobility

Enables controller or service platform assisted mobility to determine a wireless client‘s VLAN assignment. When enabled, a controller or service platform‘s mobility database is used to assist in roaming between RF Domains. This option is disabled by default.

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

controller-assisted-mobility

Parameters

None

Examples

ap505-13403B(config-wlan-test)#controller-assisted-mobility

ap505-13403B(config-wlan-test)#show context
wlan test
 ssid test
 vlan 1
 bridging-mode local
 encryption-type ccmp
 authentication-type sae-psk
 protected-mgmt-frames optional
 controller-assisted-mobility
ap505-13403B(config-wlan-test)#

Related Commands


no (wlan-config-mode)	Disables controller or service platform assisted mobility to determine a wireless client‘s VLAN assignment