AP410i/e Specifications

AP410i/e is a tri-radio, indoor model 802.11ax access point. The “i” in AP410i/e indicates that the access point comes with internal antennas and the “e” indicates that it comes with external antenna connectors. The access point features a dual-band radio, two band-locked radios, six WiFi internal or external antennas, and one BLE antenna.

Note

The AP410i/e requires a minimum base firmware of WiNG 7.3.0.

Radios: Three 802.11ax radios
- One 2X2 2.4 GHz radio
- One 4X4 5 GHz radio
- One 2X2 2.4 GHz and 5 GHz radio
One 2.4 GHz IoT radio
Console Port: RJ45.
Two Ethernet Ports:
- GE1 - 10/100/1000/2500/5000 Mbps auto-negotiation Ethernet port, RJ45, with PoE In
- GE2 - One multi-rate GE/2.5 GE Ethernet port
LEDs: Seven – all LEDs will be powered on during reset and will connect to general purpose input/ output (GPIO) pins
One Reset button
One Kensington lock
One safety hanger provision
One USB 2.0 type A connector
Power: PoE 802.3at
Antennas:
- AP410i: Six WiFi internal antennas and one BLE internal antenna
- AP410e: Six RP-SMA external antenna ports and one BLE RP-SMA antenna