location

Configures the RF Domain's physical location. The location could be as specific as the building name or floor number. Or it could be generic and include an entire site. The location defines the physical area where a common set of device configurations are deployed and managed by an RF Domain policy.

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

location <WORD>

Parameters

location <WORD>


location <WORD>	Configures the RF Domain location by specifying the area or building name <WORD> – Specify the location.

Examples

nx9500-6C8809(config-rf-domain-default)#location SanJose

nx9500-6C8809(config-rf-domain-default)#show context
rf-domain default
 location SanJose
 contact Bob+14082778691
 country-code us
 channel-list 2.4GHz 1,2,3,4,5,6,7,8,9,10
 layout area Ecospace floor Floor1 map-location www.firstfloor.com units meters
 control-vlan 1
nx9500-6C8809(config-rf-domain-default)#

Related Commands


no (rf-domain-config-mode)	Removes the RF Domain's location configuration