use (meshpoint-config)

Uses a QoS (Quality of Service) policy defined specifically for meshpoints. To use this QoS policy, it must be defined.

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

use [aaa-policy <AAA-POLICY-NAME>|meshpoint-qos-policy <MESHPOINT-QOS-POLICY-NAME>]

Parameters

use [aaa-policy <AAA-POLICY-NAME>|meshpoint-qos-policy <MESHPOINT-QOS-POLICY-NAME>]


meshpoint-qos-policy <MESHPOINT-QOS-POLICY-NAME>	Configures this meshpoint to use a predefined meshpoint QoS policy <MESHPOINT-QOS-POLICY-NAME> – Specify the meshpoint QoS policy name (should be existing and configured).
aaa-policy <AAA-POLICY-NAME>	Configures this meshpoint to use a predefined aaa-policy <AAA-POLICY-NAME> – Specify the aaa-policy name (should be existing and configured).

Examples

nx9500-6C8809(config-meshpoint-test)#use meshpoint-qos-policy test

nx9500-6C8809(config-meshpoint-test)#show context
meshpoint test
 description "This is an example of a meshpoint description"
 meshid TestingMeshPoint
 shutdown
 beacon-format mesh-point
 control-vlan 1
 allowed-vlans 1,10-16,18-23
 neighbor inactivity-timeout 300
 data-rates 2.4GHz bgn
 data-rates 5GHz an
 security-mode psk
 root
 use meshpoint-qos-policy test
nx9500-6C8809(config-meshpoint-test)#

Related Commands


no (meshpoint-config)	Removes the meshpoint QoS policy associated with this meshpoint
meshpoint-qos-policy-config-instance	Creates and configures a meshpoint QoS policy
AAA Policy	Creates and configures an AAA policy