mac-name
Device Config Commands
Configures a client name to MAC address mapping. Use this command to assign a user-friendly name to the device (controller, service platform, or access point) and map it to the device‘s MAC address.
Supported on the following devices:
Access
Points: AP3000 /X, AP5010 , AP310i/e , AP410i/e , AP505i , AP510i , AP510e , AP560i , AP7602 , AP7612 , AP7622 , AP7632 , AP7662 , AP8163 , AP8533 . Service Platforms: NX5500, NX7500, NX9500, NX9600 Virtual Platforms : CX9000, VX9000 Parameters mac-name <MAC> <NAME>
mac-name <MAC> <NAME> Maps a user-friendly name to the device‘s MAC address<MAC> – Specify the device‘s MAC address.<NAME> – Specify the 'friendly' name used for the specified MAC address. This is the name used in events and statistics logs.
Example nx9500-6C8809(config-device-94-9B-2C-13-3E-1C)#mac-name 00-04-96-4A-A7-08 5.8TestAP
nx9500-6C8809(config-device-94-9B-2C-13-3E-1C)#show context
ap505 94-9B-2C-13-3E-1C
use profile default-ap505
use rf-domain default
hostname TechPubAP505
area RMZEcospace
floor 5thfloor
layout-coordinates 1.0 2.0
location SanJose
contact Bob+1-631-738-5200
country-code us
channel-list 2.4GHz 1,2
mac-name 94-9B-2C-13-3E-1C 5.8TestAP
nx9500-6C8809(config-device-94-9B-2C-13-3E-1C)#
Related Commands no Removes the device‘s friendly name to MAC address mapping
