Note
Excessive packet capture degrades network performance. When enabling packet capture on all APs, specify at least one MAC address filter to avoid performance degradation.enable | disable | Enables or disables wireless packet capture. |
The following example captures wireless packets from all possible APs and uses an IP address and MAC address to filter the results:
EWC.extremenetworks.com:ap-traffic-capture# capture-wireless enable
EWC.extremenetworks.com:ap-traffic-capture# filter-ip1 192.168.13.13
EWC.extremenetworks.com:ap-traffic-capture# filter-mac1 00:00:00:00:00:01
EWC.extremenetworks.com:ap-traffic-capture# use-filter-ip1 enable
EWC.extremenetworks.com:ap-traffic-capture# use-mac1 enable