Use the iot-ibeacon-uuid command to configure the ibeacon UUID — Identifier used to differentiate a large group of related beacons. A company can have a network of beacons with the same UUID. The iot-ibeacon-uuid command is accessible from within the ap:<serial> context of the CLI.
| <uuid> | Identifier used to differentiate a large group of related beacons. A company can have a
network of beacons with the same UUID. Used for filtering data. ExtremeWireless forwards data with matching UUID to the Application Server and filters out all other UUID data. If UUID configured value is all zeros, no filtering occurs. |
The IoT functionality is supported on the AP3912i, AP3915, AP3916ic, and AP3917. Enable iot-admin before issuing this command.
The following example sets the ibeacon UUID on an AP3916ic.
EWC.extremenetworks.com:ap:1254Y-3211230000#iot-ibeacon-uuid fadbfc46-f9a8-4454-b2ba-2e81a43d2a11
Print
this page
Email this topic
Feedback
View PDF
Download EPUB