defaults

The defaults command moves you into the defaults context, which contains commands to configure the Wireless AP‘s default settings. The defaults command is accessible from the ap context of the CLI.

As the Wireless APs discover and register with the controller, they inherit the properties of the default Wireless AP setting. Since these defaults must apply to multiple AP platforms, they consist only of values that are supported on all platforms. To apply options individually to an AP, you can modify the default Wireless AP settings on that AP either via the Wireless Assistant GUI or the CLI <serial> context.

The following commands are available in the ap:defaults context:

Note

The commands are case sensitive.

• ap37xx — For commands in the ap:defaults:ap37xx context.
• ap376x — For commands in the ap:defaults:ap376x context.
• ap38xx — For commands in the ap:defaults:ap38xx context.
• ap3801 — For commands in the ap:defaults:ap3801 context.
• ap3805ROW — For commands in the ap:defaults:ap3805ROW context.
• 3912FCC and 3912ROW — For commands in the ap:defaults:ap3912FCC and ap3912ROW context.
• 3915FCC and 3915ROW — For commands in the ap:defaults:3915FCC and 3915ROW context.
• 3916FCC and 3916ROW — For commands in the ap:defaults:3916FCC and 3916ROW context.
• 3917FCC and 3917ROW — For commands in the ap:defaults:3917FCC and 3917ROW context.
• 3935FCC, 3935ROW, 3935IL — For commands in the ap:defaults:3935FCC, 3935ROW, and 3935IL context.
• 3965FCC and 3965ROW— For commands in the 3965FCC or 3965ROW context.
• assign
• learnac
• aclist
• acws
• move