Use the nasid command to configure an NAS identifier for this site. The nasid command is accessible from the site:<named-site> context.
string | Specifies an NAS identifier for this <named-site>. |
vnsname | Specifies that the VNS (Virtual Networks Service) name is used as the NAS identifier for this <named-site>. |
The CLI <named-site> context must be in config mode for a RADIUS (Remote Authentication Dial In User Service) server to execute the nasid command. Use the config radius name command to enter config mode. Use config exit to exit config mode.
The following example configures a VNS name as a NAS ID for site1:
EWC.extremenetworks.com:site:site1# nasid vnsname