View Power Supply Parameters

Perform this procedure to view information about the operating status of the power supplies.

Procedure

  1. In the navigation pane, expand Configuration > Edit.
  2. Select Power Supply.
  3. Select the Detail tab.

Detail Field Descriptions

Use the data in the following table to use the Detail tab.

Name

Description

Type

Describes the type of power used.

Note: To know what power types the switch supports, see the hardware installation documentation.

Description

Provides a description of the power supply.

SerialNumber

Specifies the power supply serial number.

HardwareRevision

Specifies the hardware revision number.

PartNumber

Specifies the power supply part number.

PowerSupplyOperStatus

Specifies the status of the power supply as one of the following:

  • unknown
  • empty
  • up
  • down

InputLineVoltage

Displays the input line voltage:

  • low110v—power supply connected to a 110 Volt source

  • high220v—power supply connected to a 220 Volt source

  • ac110vOr220v—power supply connected to a 110  Volt or 220 Volt source

OutputWatts

Displays the output power of this power supply.
9037803-00 Rev AA