Enabling SPB-PIM Gateway on a Brouter port interface
Enable SPB-PIM Gateway on a Brouter port.
Procedure
- In the Device Physical View tab, select the port you need to configure.
- In the navigation pane, expand .
- Click IP.
- Click the SPB-PIM-GW tab.
- Select the Enable check box to enable SPB-PIM Gateway on a Brouter port interface.
- Click Apply.
SPB-PIM-GW field descriptions
Use the data in the following table to use the SPB-PIM-GW tab.
|
Name |
Description |
|---|---|
|
Enable |
Enables SPB-PIM Gateway on the interface. The default is disabled. |
|
OperState |
Displays the current operational state of this SPB-PIM Gateway interface. |
|
Address |
Displays the primary IP address of this router on this SPB-PIM Gateway interface. |
|
AddressMask |
Displays the primary IP address mask of this router on this SPB-PIM Gateway interface. |
|
HelloInterval |
Configures the PIM HELLO transmission interval. |
|
JoinPruneInterval |
Configures the PIM JOIN PRUNE transmission interval. |