Configure Subnet Routers

Use this procedure to configure the Subnet Routers tab in EDM for a DHCP subnet.

Procedure

  1. In the navigation pane, select Configuration > IP > DHCP Server.
  2. Select the Subnet tab.
  3. Select the applicable subnet and select Extra.
  4. Select the Subnet Routers tab.
  5. In the Subnet IP field, enter the subnet network address.
  6. In the Subnet Mask field, enter the subnet mask.
  7. In the IP field, enter the router IPv4 address.
  8. Select Insert.
  9. Repeat these steps if you want to add additional router addresses.

Subnet Routers Field Descriptions

Use the data in the following table to configure the Subnet Routers tab for a DHCP subnet.

Name Description
Subnet IP Specifies the network address of the DHCP subnet.
Subnet Mask Specifies the subnet mask of the DHCP subnet.
IP Specifies the IPv4 address for the subnet router. You can assign up to eight router addresses.
9037803-00 Rev AA